Last week I did an upgrade of the LaserKey. The temporary control box that I made in the last edition is now replaced with a more sturdy plastic box.
Part 1: The upgrade
![Mounted switches and LEDs](https://www.norwegiancreations.com/wp-content/uploads/2014/05/IMG_20120425_205911.jpg)
![The Jack plug for the foot pedal](https://www.norwegiancreations.com/wp-content/uploads/2014/05/IMG_20120425_205917.jpg)
![The inside of the box, quite simple :)](https://www.norwegiancreations.com/wp-content/uploads/2014/05/IMG_20120425_205929.jpg)
![LaserKey board mounted on the bottom plate inside the box](https://www.norwegiancreations.com/wp-content/uploads/2014/05/IMG_20120425_213608.jpg)
![I lowered down the screws on the bottom of the box](https://www.norwegiancreations.com/wp-content/uploads/2014/05/IMG_20120425_213906.jpg)
![Hole for the USB plug](https://www.norwegiancreations.com/wp-content/uploads/2014/05/IMG_20120425_213623.jpg)
![Side view :)](https://www.norwegiancreations.com/wp-content/uploads/2014/05/IMG_20120425_213640.jpg)
![Testing...](https://www.norwegiancreations.com/wp-content/uploads/2014/05/IMG_20120425_214239.jpg)
![And it works :)](https://www.norwegiancreations.com/wp-content/uploads/2014/05/IMG_20120425_214320.jpg)
![Finished LaserKey v1.1](https://www.norwegiancreations.com/wp-content/uploads/2014/05/IMG_20120425_224516.jpg)
Part 2: Using it
On Saturday 28.04.12 I had a Laser gig here in Trondheim.
There I did full laser production at Autolaser’s concert in Studenter Samfundet. I used two RGB lasers and one RGY laser.
Video from the gig:
![Lasers](https://www.norwegiancreations.com/wp-content/uploads/2014/05/IMG_20120428_212335.jpg)
![More lasers](https://www.norwegiancreations.com/wp-content/uploads/2014/05/IMG_20120428_212307.jpg)